Keybolt Pin Stone Anchor (276-KB)

Made to Order

Used to anchor stone with the Heckmann Pos-I-Tie® Keybolt anchoring system. The Keybolt Barrel Screw installs through insulation in the backup and the hole is sealed with a tightened nut and washer. The anchor is installed between the two nuts and aligned with the stone. The outer nut is tightened to secure the anchor.

Specify thickness of anchor, length, width (Minimum 1.25"), Bend with KeySlot (minimum 2.25"), diameter and length of pin and location of pin. Specify if pin is to be loose or welded in place.

Type 304 or Type 316 Stainless Steel Only

(For same anchor with a hole instead of the KeySlot see #276 Screw-On Pin-Type Stone Anchor