Building Envelope and Tileable Solutions
ProGUARD wall panels consist of ¼" Util-A-Crete® Concrete Backerboard laminated to a continuous layer of rigid insulation providing a wall system that's ready-to-finish and installs faster than conventional building techniques. ProGUARD provides superior thermal protection with ship-lapped edges that eliminate thermal breaks. All joints are sealed with acrylic waterproofing and fiberglass mesh tape that provide an airtight seal.
FinPan/T. Clear Product Line Expert
Jeff Ketterer
Product Marketing Manager
Direct: 513-905-8934
Email: FinPan: [email protected]m
Email: T. Clear: [email protected]
T Clear Products
Since 1975, T. Clear has offered a comprehensive line of building envelope products which focus on providing durability, sustainability and energy efficiency. T. Clear's American made products provide labor saving solutions from the roof top to below grade and all sides of the building.
LightGUARD PMR roof panels combine insulation and ballast to protect the waterproof membrane from hail, wind, UV, thermal cycling and more. Panels are composed of Dupont Styrofoam® extruded polystyrene insulation with a 3/8-inch latex-modified concrete topping on a 2' x 4' tongue-and-groove panel, weighing 4.5 lb. per square foot per panel.
HeavyGUARD PMR roof panels combine insulation and ballast to protect the waterproof membrane from hail, wind, UV, thermal cycling and more. Panels are composed of Dupont Styrofoam® extruded polystyrene insulation with a 15/16-inch latex-modified concrete topping on a 2' x 4' tongue-and-groove panel, weighing 11 lb. per square foot per panel.
For Technical Information Click Here
Request Sample
ProGUARD wall panels consist of ¼" Util-A-Crete® Concrete Backerboard laminated to a continuous layer of rigid insulation providing a wall system that's ready-to-finish and installs faster than conventional building techniques. ProGUARD provides superior thermal protection with ship-lapped edges that eliminate thermal breaks. All joints are sealed with acrylic waterproofing and fiberglass mesh tape that provide an airtight seal.
ProGUARD DP offers the same features and benefits of ProGUARD Concrete Insulated Sheathing along with specially cut drainage planes in the insulation that enable moisture to migrate down the wall assembly to flashing lines. Panels are offered in single or double-sided drainage planes to meet your specific installation requirements.
For Technical Information Click Here
Request Sample
WallGUARD is manufactured using Dupont Styrofoam ® extruded polystyrene insulation, with a factory-applied 5/16-inch latex-modified concrete coating. Panels are 2'x4' with tongue-and-groove edges on the 4' length. WallGUARD protects and insulates the exposed areas of foundations, slab edges, rim joists and roof parapet walls that are all prone to energy loss.
ThermaDry Insulating Drainage Panels are manufactured with a series of closely spaced vertical and horizontal channels that help direct ground water flow to the French drain. Adhered to the channeled surface is a spunbonded geotextile filtration fabric preventing soil from entering and clogging the channels.
Mineral wool and glass fiber drainage products deform when compressive load is applied.ThermaDRY panels withstand compressive load limits with deformation to less than 1.5% over a 20-year time frame. As a result, high drainage rates and insulation values are maintained.
T Clear Accessories
T. Clear offers a full line of accessory products from fasteners, polyurethane sealants, liquid waterproofing, joint tape and PVC cap and side flashing for WallGUARD to ensure proper installation of the entire line of building envelope products.
T Clear Resource Library
T Clear Green Position
T. Clear Corporation's innovative thinking has created a family of quality, long-lasting building products that use thin concrete extrusion technology combined with energy-efficient polystyrene insulation to produce interior and exterior sustainable applications.
FinPan Products
Since 1975, FinPan, Inc. has offered a comprehensive line of building products that properly manage water in showers and other wet areas for residential and commercial installations. FinPan's American made products offer durability and labor-saving solutions for the seasoned professional to the DIYer. From concrete backerboard to the complete line of PreFormed® shower pans, niches, seats and more, FinPan is “The Strength Behind the Beauty".
For Technical Support Click Here
Architects Corner
ProPan Shower Pans are made from high-density polystyrene and reinforced with fiberglass mesh and a liquid-applied waterproof coating. ProPan comes standard with code-required slope and integrated drain assembly. ProPan is field modifiable and UPC rated. They are available in standard and custom sizes. ProPan is also available in shower kits with WaterArmor ® Waterproofing Sheet Membrane for surrounding walls.
PreFormed Shower Pans are made from high-density polystyrene, ProTEC™ Concrete Backerboard side walls, and wrapped in fiberglass mesh with a liquid-applied waterproof coating. Shower pans come standard with the code-required slope, integrated drain assembly and curb built-in. PreFormed Pans are ready-to-tile and UPC rated. They are available in standard and custom sizes.
The ClearPath Curbless Shower Pan System offers the ability to create a barrier-free shower without modifications the floor system. Using TI-ProBoard™ Structural Underlayment as the base, gives ClearPath the unique ability to be built directly on top of the floor joists. From today's modern designs to ADA or special needs requirements, ClearPath meets changing lifestyle needs.
PreFormed Niches are molded from high-density polystyrene with a liquid-applied waterproof coating and are ready-to-tile. Niches' unique in-wall design can be used in showers, kitchens or any other area of the home imagined. They are available in standard and custom sizes.
Util-A-Crete is a superior underlayment for interior and exterior applications. Util-A-Crete provides a stable, long-lasting foundation for ceramic tile and other facing materials used on floors, walls, ceilings, countertops and exteriors. It is made of durable Portland cement, alkaline resistant fiberglass mesh and lightweight aggregate.
ProTEC is specifically designed to provide a permanent base for a wide variety of interior construction applications. It is made of durable Portland cement, alkaline resistant fiberglass mesh and lightweight aggregate. ProTEC provides a stable base for ceramic tile on floors, walls, ceilings and countertops.
TI-PROBOARD is a sustainable, durable and virtually maintenance-free underlayment for exterior deck tile installations. TI-PROBOARD is a composite panel that is unaffected by expansion/contraction or other weather conditions. TI-ProBoard attaches directly to deck joists and is ready-to-tile. It achieved a commercial floor rating in the 14' Suspended Robinson Floor Test.
WaterArmor is a 100% acrylic based, ready to use formula. It can be brush, roll or trowel applied to provide a barrier resistant to air and water.
WaterArmor is a 2m (6.5') wide load bearing, bonded, waterproof sheet membrane that reduces seams in showers. WaterArmor sheet membrane is UPC rated and meets ANSI A118.10.
WaterTite is a 40-mil PVC membrane used in tile showers and other concealed waterproofing applications. WaterTite is IAPMO ad UPC listed and meets ASTM D 4551.
Fin Pan Accessories
FinPan offers a full line of accessory products from fasteners, polyurethane sealants, liquid waterproofing and joint tape to ensure proper installation of the product offering.
Fin Pan Resource Library
Green/LEED Statement
Our founder, Ted Clear, had the vision to produce durable, sustainable products that could stand the test of time. He developed products that changed the way tile installations were performed and several products qualify for LEED credits. Today, our vision continues to look forward by providing sustainable, durable and labor-saving products that offer “Simple Tileable Solutions".