Specialty Roofing Products

StormStop™ ridge vent provides superior protection that stops snow, rain, sand and bugs from entering the attic. Fitted with our patented weather-blocker, this spun-bound material is 71% open and 29% closed. This technology allows the material's exterior surface to repel water so that it beads up and rolls out of vent, while the interior surface remains breathable to allow air and moisture to flow out.  Don't confuse this unique material with vent filters, as it far superior in function and protection.  Designed without an external baffle keeps ridge vent clog-free from pine straw and leaves. Durable and impact resistant, ridge vent is made of HDPE plastic to withstand hail damage and gun-nailable for fast and easy installation. Delivers the best protection and ventilation along with the most sleek design for a clean, neat and long-lasting roof appearance.

FlowThru ridge vent provides long-lasting protection that keeps air flowing thru the attic for a healthy home. FlowThru ridge vent ensures air is evenly distributed throughout the attic and at the roof's highest point to prevent hot, moist air pockets to keep a cool and dry attic. Designed without an external baffle keeps ridge vent clog-free from pine straw and leaves. Durable and impact resistant, ridge vent is made of HDPE plastic to withstand hail damage and gun-nailable for fast and easy installation. FlowThru ridge vent is ideal for drier climate regions that do not receive storm-driven rain or significant accumulations of snow fall. Delivers excellent ventilation and a sleek design for a clean, neat and long-lasting roof appearance.

AtticDefense ridge vent ensures dependable protection that provides continuous airflow throughout the attic. AtticDefense is a nylon-fiber mesh ridge vent that provides exceptional airflow. Designed to be the superior-choice among mesh ridge vents it's made of engineered nylon which feels sturdy and wire-like, versus more common soft mesh materials. It will not compress or flatten over time, nor will it breakdown and clog compared to naturally derived mesh materials that use coconut hulls and fabric covered vents. Compared to Quarrix's HDPE ridge vents, AtticDefense ridge vent is considered more flexible and lightweight, a value choice that delivers continuous ventilation for a cool and dry attic.

OffRidge Intake & Exhaust vent provides on-deck ventilation for hard to vent areas. Perfect for homes with closed, boxed-in soffits, or no overhang, OffRidge allows you to install intake ventilation easily along the bottom third of the roof deck. Roof-to-wall and fire walls are other hard to vent areas where OffRidge makes adding ventilation easy and clean without causing any unsightly protrusions from the roof. Equipped with our patented weather-blocker and made of HDPE plastic, it can withstand the impact of hail and elements of Mother Nature. OffRidge Intake and Exhaust vent delivers the best on-deck and off-ridge ventilation with a sleek design for a clean, neat architecture.

Quarrix ContinUFlow Soffit vent provides uninterrupted air flow under the eave to allow air to be drawn up and into the attic. Unlike traditional soffit vents that are stretched apart and sporadically placed under eaves, ContinuFlow creates an uninterrupted line for intake ventilation along the entire eave line. With six different installation methods, ContinU Flow can be installed anywhere intake ventilation is necessary. Made of durable, high-quality HDPE plastic, ContinUFlow soffit vents are sleek in design and provide superior intake ventilation.

Quarrix SmartPlug™ Roof Patch is the smartest solution for covering holes in the roof fast. It makes converting from static vents to ridge ventilation products faster and easier than traditional methods.  Place it, nail it, done! Made of heavy-duty 24-gauge galvanized steel with a reinforced backside that can hold more than 700 lbs. SmartPlug Fits standard sized holes left by box, slant-back and turbine vents; available in 8" and 12" sizes.

ProBoot pipe flashing provides long-lasting, durable protection that stops leaks on the roof from entering the home. Made of all-steel construction and special nylon painted coating, ProBoot will not rust or corrode. Engineered to provide an air gap between the pipe and cover side-walls prevents frost and freezing over on top. The lead-free top reduces pesky varmints as well as the extra protection ProBoot provides. Stop replacing cheap rubber collars and reduce call-backs, installing ProBoot pipe flashing where most leaks start keeps the roof long-lasting and home healthy. Available in several colors to blend into the roof and easily adjusts to roof pitches between 3/12 to 14/12 for a custom fit.

Quarrix DryRoof Roof Battens provide superior protection that ensures proper water drainage and airflow under composite, concrete and clay tile. Install directly to the roof deck to elevate the roofing material to keep the roof deck properly ventilated. Engineered with small air channels allowing water drainage and airflow to the roof deck to stay dry and prevent rot. Constructed of HDPE plastic, DryRoof Roof Battens are resistant to warping, splitting, mold and mildew, a longer lasting alternative to wood battens. When building a roof with synthetic, composite, concrete or clay materials it's imperative to have a strong batten system that can support and last the life of the roof.

Quarrix Composite Roofing provides the same beautiful look as traditional clay and concrete tiles but with the benefits of a lightweight synthetic roof tile material. 67% less weight than traditional roof tiles, Quarrix double barrel roof tile can be installed on existing homes and buildings without needing structural roof modifications that other materials may require.

At the heart of the Quarrix system, is our philosophy of innovating products that will protect your investment while enhancing the beauty of your tile roof. Since a roof is built from the bottom up, its foundation must be properly protected to guarantee the roof's long-term success and lasting beauty.

Tile roofs stay beautiful longer when they are properly installed using our complete system of tile components. They provide the foundational support tile roofs need to protect against aging and fail points caused by water drainage, poor air-circulation, mortar joints and challenging roof angles. Quarrix tile components provide superior long-term performance for your peace of mind.

Quarrix ProTect Furring Strips provide long-lasting protection that prevents moisture damage within the walls. Uniquely designed with small air channels to allow bulk water and other moisture to easily escape behind cladding, and air to flow vertically and horizontally to keep the wall assembly dry. Made of durable, HDPE plastic, ProTect Furring Strips are resistant to warping, splitting, mold and mildew. Each piece is dimensionally die-cut so that you receive an identical piece every time. Approximately 1 linear foot of ProTect Furring Strips will be needed for every 1 square foot of wall covering.

Quarrix ProTect Drain Mat promotes breathability between the walls for a healthy home. The 3D non-woven drainage mat material is 95% open and moisture resistant to help prevent moisture damage to exterior walls by creating a drainage plane for trapped water to run off and an air cavity to promote cross-ventilation and drying. ProTect Drain Mat is compression resistant and Class A fire rated, designed to create a rainscreen system that will help extend the life of the siding material and prevent expensive moisture damage to the exterior walls

ProTect Siding Starter offers easy-to-install, breathable moisture protection behind the first course of cladding. Crafted from lightweight HDPE plastic, these strips boast easy handling and installation, cutting down on both time and expenses. Their innovative design incorporates small air channels, facilitating optimal airflow to keep your walls dry and safeguard against moisture buildup. Unlike traditional wood or cladding materials, ProTect Siding Starter exhibits exceptional durability, resisting rot, warping, and splitting. Plus, with a built-in insect barrier, they offer added protection against pests.

In this immersive episode of Roofing Road Trips, listen as Heidi J. Ellsworth, RCS president, sits down with Nick Nobbe of Quarrix to discuss their Wall Protection Product line, including the new rain screen technology.  An unseen line of defense, rain screen products are designed to keep walls dry and prevent trapped moisture from accumulating behind cladding – keeping mold and pests away and siding beautiful. Listen to this episode of Roofing Road Trips to learn more about these innovative products and how you can incorporate them into your company today!

Nick Nobbe of Quarrix leads this informative RLW sharing with Heidi J. Ellsworth the importance of educating homeowners on ventilation.  Highlighting recent statistics and survey results, they share how 92% of homes across the U.S. do not have the right ventilation.  Nick talks about the benefits of understanding ventilation and then using that to educate homeowners on the importance of correctly installed quality ventilation for their home.  Homeowners overwhelmingly want roofing salespeople who are highly knowledgeable about products, pricing, options and warranty.  Through case studies he shows that educating homeowners on the importance of ventilation leads to closing more sales and differentiating your business.

Nick Nobbe of Quarrix joins Heidi J. Ellsworth on this Roofing Road Trip that explores how contractors can successfully incorporate ventilation in the sales and education process for homeowners.  Highlighting recent statistics and survey results, they talk about the data including how 92% of homes across the U.S. do not have the right ventilation and how homeowners overwhelmingly want roofing salespeople who are highly knowledgeable about products, pricing, options and warranty.