Cold Storage and Specialty Doors
The AC Air Curtain by HCR, also known as ADS-400, is a top-tier solution for climate control. This air curtain features a horizontal, curvilinear, and recirculatory design. It effectively manages air flow and temperature between different environments. Perfect for cooler-to-cooler, cooler-to-ambient, and freezer-to-freezer applications, it helps maintain temperature integrity and boost energy efficiency.
Click Here To Request More Information
The Model CAC Air Curtain is for applications where temperatures and humidity exceed the limits of our Model AC. A heater unit is added to condition the air as it mixes inside the vestibule.
The Model CAC automatically adjusts as conditions change to optimize performance and reduce energy consumption.
With the use of HCR sensors and software, Model CAC can be integrated into a facility’s refrigeration control and monitoring system. This allows not only remote monitoring but remote adjusting of the HCR equipment.
Click Here To Request More Information
The Model DCAV uses two recirculatory air curtains, creating an air vestibule between the two air streams where the air is captured and treated to a non-frost, non-fog state.
The Model DCAV automatically adjusts as conditions change to optimize performance and reduce energy consumption.
With the use of HCR sensors and software, Model DCAV can be integrated into a facility's refrigeration control and monitoring system. This allows not only remote monitoring but remote adjusting of the HCR equipment.
Click Here To Request More Information
The Model 3CAV is primarily used between rooms with extreme temperature differences and very high traffic. The frost elimination cycle is similar to the Model DCAV but the additional vestibule improves efficiency as well as increases the model's temperature range applicability.
The Model 3CAV automatically adjusts as conditions change to optimize performance and reduce energy consumption. With the use of HCR sensors and software, Model 3CAV can be integrated into a facility's refrigeration control and monitoring system. This allows both remote monitoring and remote adjusting of the HCR equipment.
Click Here To Request More Information
The basic NPAC model is made to counteract the one-way flow-through forces caused by negative building pressure or by wind effects. Supply where indicated on plans HCR Model NPAC Air Door for doorways with low temperature differentials and or for temperatures above freezing. Air Door to be powder coated cold-rolled steel. Powder coating meets 500 hour salt spray test.
Click Here To Request More Information
Achieve the next level of efficiency by adding an HCR Model AC or CAC to your existing door. Perfect for high-traffic doorways where ice and infiltration are a challenge, an HCR Air Door provides another layer of protection to assure that the opening remains accessible for workflow, yet closed for costly air infiltration and energy efficiency.
Click Here To Request More Information
By combining an air door with your currently installed door, you are assuring an efficient air block when your hard door is open, reducing cold air loss and decreasing the problems associated with high-traffic openings, such as ice and safety concerns.
Click Here To Request More Information
The Model RCAV is a short, conditioned-air vestibule for freezer to outer room conditions that span large temperature differentials up to 100 degrees with average doorway traffic and limited floor space around the door.
It significantly reduces refrigeration load while preventing frost, ice and wetness at the doorway. It consists of two high speed rollup doors, and a heated horizontal, recirculatory air curtain between the doors. It is equipped with a PLC or Solid State automated control, to regulate the amount of air and heat required.
Click Here To Request More Information
A conditioned air vestibule that uses a push-to-open versus a motorized opening. PCAV® consists of two pairs of impact-type doors or fixed strips, an electrically or hot-gas heated anti-frost air-conditioning (AFC) section with patent pending PLC control, and measures approximately 16 in the direction of travel.
Click Here To Request More Information
Miniature/small version of CAC for conveyors.
The temperature differences at conveyor openings, if unprotected, are subject to the same problems as regular doorways. Prevent air infiltration and frost and ice buildup by installing HCR equipment designed to work seamlessly with your conveyor system.
Conveyor units are tailored to suit your specific application in coolers, freezers, or ambient temperatures. HCR project managers and engineers will discover every detail to assure the right solution for you.
Click Here To Request More Information
For over 115 years, Jamison Doors have helped facilitate the movement of goods and personnel like no other company. Quite simply, we offer the widest selection of industrial, specialty, and temperature controlled doors to suit just about every imaginable application. Whether it swings, rolls, slides, or uses state of the art recirculatory air technology, Jamison is dedicated to delivering the performance you need.
Continuing Education
Obtain AIA Continuing education credits while learning about the many benefits of our door products. We are committed to educating the professionals (and up-and-coming professionals) about our industry. Begin by clicking here for more information.
Air Doors
The AC Air Curtain by HCR, also known as ADS-400, is a top-tier solution for climate control. This air curtain features a horizontal, curvilinear, and recirculatory design. It effectively manages air flow and temperature between different environments. Perfect for cooler-to-cooler, cooler-to-ambient, and freezer-to-freezer applications, it helps maintain temperature integrity and boost energy efficiency.
Click Here To Request More Information
The Model CAC Air Curtain is for applications where temperatures and humidity exceed the limits of our Model AC. A heater unit is added to condition the air as it mixes inside the vestibule.
The Model CAC automatically adjusts as conditions change to optimize performance and reduce energy consumption.
With the use of HCR sensors and software, Model CAC can be integrated into a facility’s refrigeration control and monitoring system. This allows not only remote monitoring but remote adjusting of the HCR equipment.
Click Here To Request More Information
The Model DCAV uses two recirculatory air curtains, creating an air vestibule between the two air streams where the air is captured and treated to a non-frost, non-fog state.
The Model DCAV automatically adjusts as conditions change to optimize performance and reduce energy consumption.
With the use of HCR sensors and software, Model DCAV can be integrated into a facility's refrigeration control and monitoring system. This allows not only remote monitoring but remote adjusting of the HCR equipment.
Click Here To Request More Information
The Model 3CAV is primarily used between rooms with extreme temperature differences and very high traffic. The frost elimination cycle is similar to the Model DCAV but the additional vestibule improves efficiency as well as increases the model's temperature range applicability.
The Model 3CAV automatically adjusts as conditions change to optimize performance and reduce energy consumption. With the use of HCR sensors and software, Model 3CAV can be integrated into a facility's refrigeration control and monitoring system. This allows both remote monitoring and remote adjusting of the HCR equipment.
Click Here To Request More Information
The basic NPAC model is made to counteract the one-way flow-through forces caused by negative building pressure or by wind effects. Supply where indicated on plans HCR Model NPAC Air Door for doorways with low temperature differentials and or for temperatures above freezing. Air Door to be powder coated cold-rolled steel. Powder coating meets 500 hour salt spray test.
Click Here To Request More Information
Achieve the next level of efficiency by adding an HCR Model AC or CAC to your existing door. Perfect for high-traffic doorways where ice and infiltration are a challenge, an HCR Air Door provides another layer of protection to assure that the opening remains accessible for workflow, yet closed for costly air infiltration and energy efficiency.
Click Here To Request More Information
By combining an air door with your currently installed door, you are assuring an efficient air block when your hard door is open, reducing cold air loss and decreasing the problems associated with high-traffic openings, such as ice and safety concerns.
Click Here To Request More Information
The Model RCAV is a short, conditioned-air vestibule for freezer to outer room conditions that span large temperature differentials up to 100 degrees with average doorway traffic and limited floor space around the door.
It significantly reduces refrigeration load while preventing frost, ice and wetness at the doorway. It consists of two high speed rollup doors, and a heated horizontal, recirculatory air curtain between the doors. It is equipped with a PLC or Solid State automated control, to regulate the amount of air and heat required.
Click Here To Request More Information
A conditioned air vestibule that uses a push-to-open versus a motorized opening. PCAV® consists of two pairs of impact-type doors or fixed strips, an electrically or hot-gas heated anti-frost air-conditioning (AFC) section with patent pending PLC control, and measures approximately 16 in the direction of travel.
Click Here To Request More Information
Miniature/small version of CAC for conveyors.
The temperature differences at conveyor openings, if unprotected, are subject to the same problems as regular doorways. Prevent air infiltration and frost and ice buildup by installing HCR equipment designed to work seamlessly with your conveyor system.
Conveyor units are tailored to suit your specific application in coolers, freezers, or ambient temperatures. HCR project managers and engineers will discover every detail to assure the right solution for you.
Click Here To Request More Information
Cold Storage Doors
Enhance the Efficiency of Your Cold Storage Facility with the Mark IV VersaFlex Bi-Parting Power-Operated Door – ADS-220
The VersaFlex® was specially-designed with every component being a part of the hittable process. Using Jamison’s patent-pending Shearflow™ technology, panels are constructed with internal layers that move independently when struck. The Shearflow design reduces its normal rigidity by 75%, yielding to the impact, without damaging the panel or door components.
Click Here To Request More Information
Jamison's most popular door offers unique designs, features and benefits that keep it in high demand throughout the industry.
Our standard door panels and face casings are woodless.
Click Here To Request More Information
A favorite of industry experts, Jamison's Overhead Sliders are extremely versatile with design configurations for virtually any application.
Click Here To Request More Information
Jamison’s most popular door offers unique designs, features and benefits that keep it in high demand throughout the industry.
Our standard door panels and face frames are woodless.
Click Here To Request More Information
A favorite of industry experts, Jamison's Vertical Sliders are extremely versatile with design configurations for virtually any application.
Click Here To Request More Information
Single leaf horizontal sliding manually operated door.
Click Here To Request More Information
With a Powertron® DS Operator, the Food Pro® opens a 40" single-leaf door in just one second. A double-leaf door opens 80" a second. Its incredibly smooth and quiet operation is unmatched in the industry.
Our standard door panels and face casings are woodless.
Click Here To Request More Information
Jamison's most popular door offers unique designs, features and benefits that keep it in high demand throughout the industry.
Our standard door panel and face casing are woodless.
Click Here To Request More Information
A favorite of industry experts, Jamison's Vertical Sliders are extremely versatile with design configurations for virtually any application.
Click Here To Request More Information
Jamison's most popular door offers unique designs, features and benefits that keep it in high demand throughout the industry.
Our standard door panels and face casings are woodless.
Click Here To Request More Information
The VersaFlex® was specially-designed with every component being a part of the hittable process. Using Jamison's patent-pending Shearflow™ technology, panels are constructed with internal layers that move independently when struck. The Shearflow design reduces its normal rigidity by 75%, yielding to the impact, without damaging the panel or door components.
Click Here To Request More Information
Designed specifically for the needs of the retail industry.
Click Here To Request More Information
Smart Automatic Cooler and Freezer Doors bring down operating costs by making the doors ‘smarter'. Tests have shown that by the use of the Smart Controller, doorways are no longer being left open by employees thus enabling maximum energy savings, reduced infiltration, and improved productivity.
The strategic alliance between Tucker Auto-Mation, Boss Controls, and Jamison Door increases energy savings by equipping the sliding doors with microwave motion sensors, time delays, and / or Infrared presence sensors so the doors know when to open and when to close, hands free! Additional features include surveillance cameras and People Counting Systems.
Click Here To Request More Information
The Plyfoam®II cooler and freezer door model has set the standard in swinging doors. Frame is flush with the floor line, meaning there is no sill to embed in concrete. Self-rising hinges actually lift the door when opened, reducing gasket wear and eliminating the need for sloped floors. The sweep-type sill gasket also prevents thermal infiltration.
Plyfoam®II Doors are reliable, durable, tight sealing, easy-to-install and can be ordered in a wide array of styles and options.
Click Here To Request More Information
The Plyfoam® II cooler and freezer door model has set the standard in swinging doors. Frame is flush with the floor line, meaning there is no sill to embed in concrete. Self-rising hinges actually lift the door when opened, reducing gasket wear and eliminating the need for sloped floors. The sweep-type sill gasket also prevents thermal infiltration.
Click Here To Request More Information
The Plyfoam® II cooler and freezer door model has set the standard in swinging doors. Frame is flush with the floor line, meaning there is no sill to embed in concrete. Self-rising hinges actually lift the door when opened, reducing gasket wear and eliminating the need for sloped floors. The sweep-type sill gasket also prevents thermal infiltration.
Plyfoam® Doors are reliable, durable, tight sealing, easy-to-install and can be ordered in a wide array of sizes, styles, and options.
Click Here To Request More Information
Plyfoam® Doors are reliable, durable, tight sealing, easy-to-install and can be ordered in a wide array of sizes, styles, and options.
Click Here To Request More Information
High-Speed Fabric & Steel Rollups
DynamicRoll® High-speed soft bottom edge doors are fast, self-repairing, easy to clean, and completely safe.
If the door curtain comes out of its guides (for example, in the event of impact with a forklift) the system will automatically reset the curtain back into the guide on the next open cycle.
Click Here To Request More Information
DynamicRoll® High-speed soft bottom edge doors are fast, self-repairing, easy to clean, and completely safe.
If the door curtain comes out of its guides (for example, in the event of impact with a forklift) the system will automatically reset the curtain back into the guide on the next open cycle.
Click Here To Request More Information
DynamicRoll® PE (polyethylene) high-speed soft bottom edge doors are fast, self-repairing, easy to clean, and completely safe.
If the door curtain comes out of its guides (for example, in the event of impact with a forklift) the system will automatically reset the curtain back into the guide on the next open cycle.
Designed for heavy washdown.
Click Here To Request More Information
DynamicRoll® High-speed soft bottom edge doors are fast, self-repairing, easy to clean, and completely safe.
If the door curtain comes out of its guides (for example, in the event of impact with a forklift) the system will automatically reset the curtain back into the guide on the next open cycle.
DynamicRoll® columns are made from galvanized steel or stainless steel. Modular construction allows easy interchange of door parts.
At the heart of the DynamicRoll® door design is our innovative curtain edge that firmly holds the curtain into the side guides. If impacted, the curtain will release from the side guide and automatically reset on the next door cycle.
Because there are no metal parts within the curtain design, damage is kept to a minimum.
Click Here To Request More Information
The DynamicRoll® FRIGO 1 is a self-repairing insulated fabric roll-up door that acts as a thermal barrier between temperature-controlled areas. Its design prevents frost and ice buildup with a dual-layer fabric and .075-inch thick curtain.
It includes heating cables in the frame to prevent condensation and ice on the guides, making it ideal for refrigerated spaces.
Click Here To Request More Information
The DynamicRoll® Frigo 1 AIR refrigerating door is an advanced version of the Frigo 1, featuring dual lateral ventilation with recirculation for optimal airflow and temperature control. It's ideal for separating areas with different conditions.
Like the Frigo 1, it has a sandwich panel for insulation but adds lateral ventilation for precise environmental control. It suits high-traffic settings requiring product preservation and uniform temperature distribution.
Click Here To Request More Information
Frigo2 Freezer high-speed soft bottom edge doors are fast, self-repairing, easy to clean, and completely safe.
At the heart of the Frigo2 is our innovative double curtain low energy cost design. When closed the two curtains create a dead air space which is then treated with a small amount of heated air. This allows the curtains to remain frost free at the lowest energy expense. It also allows it to be either warm side or cold side mounted.
If the door curtains come out of their guides (for example, in the event of impact with a forklift) the system will automatically reset the curtain back into the guide on the next open cycle.
Click Here To Request More Information
The DynamicRoll® Frigo 2 Air freezer door shares features with the Frigo 2 but adds a patented dual ventilation system that maintains consistent internal temperatures, blocking moisture, ice, and condensation.
It's ideal for busy refrigerated settings like warehouses, preventing heat loss for energy efficiency and a safe working environment.
Click Here To Request More Information
The optimal solution for large openings. This door is designed for continual use, can be installed inside or outside of buildings, and has a simple modular design making for a fast and easy installation.
The strong belted opening system and self-supporting structure (up to 22'6″) ensures maximum functionality even for large dimensions and high wind loads.
The door design consists of a U-shaped column section finished with a rubber seal on each side to protect the curtain when operating.
Click Here To Request More Information
The ThermicRoll spiraling door is a state-of-the-art door guaranteeing the best performance in terms of speed,
safety, and insulation, combined with a very attractive appearance. Suitable for both internal and external applications, the ThermicRoll is a great fit for a range of environments.
The ThermicRoll door is a counterweighted door, no springs, with a patented CNC machine system to create track grooves replacing other complex steel track systems and requires no lubrication.
Insulated panels have high thermal-acoustic insulation, but can also be offered in both acrylic clear view or perforated for ventilation.
Click Here To Request More Information
The ThermicRoll spiraling door is a state-of-the-art door guaranteeing the best performance in terms of speed,
safety, and insulation, combined with a very attractive appearance. Suitable for both internal and external applications, the ThermicRoll is a great fit for a range of environments.
The ThermicRoll door is a counterweighted door, no springs, with a patented CNC machine system to create track grooves replacing other complex steel track systems and requires no lubrication.
Insulated panels have high thermal-acoustic insulation, but can also be offered in both acrylic clear view or
perforated for ventilation.
Click Here To Request More Information
DynamicRoll® Clean High-speed doors are self-repairing, meaning that if the door curtain comes out of their guides (for example, in the event of impact with a forklift) the system will automatically reset the curtain back into the guide on the next close cycle.
Click Here To Request More Information
The B-DRIVE® SP is an innovative self-repairing high-speed door with a PVC curtain. It features a unique “push & pull” system and a durable polyethylene coiling spiral for frictionless curtain rolling, increasing its lifespan.
Unlike other self-repairing doors, it’s motor-driven, preventing twisting and jamming upon impact. Patented features ensure consistent coiling and quiet operation, with a self-repairing guide that doesn’t require roll-up and re-insertion as competitors do.
Click Here to Request More Information
The DynamicRoll® CB 230 is a dependable high-speed door designed for cleanrooms, ensuring a sterile environment with its quick speed and tight seal.
It functions seamlessly in interlock systems with other DynamicRoll® doors, featuring a soft bottom edge, an escape function, and no stiffeners for panel flexibility.
Click Here To Request More Information
The DynamicRoll® DynaDry, with a stainless steel structure, prevents condensation and water from entering the passage when open. Its patented system safeguards passing goods and is easily washable for industry-required hygiene standards.
Click Here To Request More Information
The DynamicRoll® DynaSeal is a PVC high-speed door designed for fruit ripening and meat smoking areas. It boasts exceptional sealing and sliding capabilities, crucial for food settings. Its compact frame minimizes air permeability, ensuring precise temperature and humidity control.
It can separate various temperature zones or sterile areas and features a patented self-repair system for automatic curtain repositioning after accidents or leaks.
Click Here To Request More Information
Sound Reduction & Specialty Doors
STC and ASTM E-90 tested all steel swing doors with fire-resistant core of barrier materials and energy absorbent acoustical insulation.
Click Here To Request More Information
STC and ASTM E-90 tested all steel swing doors with fire-resistant core of barrier materials and energy absorbent acoustical insulation.
Click Here To Request More Information
STC and ASTM E-90 tested all steel swing doors with fire-resistant core of barrier materials and energy absorbent acoustical insulation.
Click Here To Request More Information
STC and ASTM E-90 tested all steel horizontal sliding doors with fire-resistant core of barrier materials and energy absorbent acoustical insulation.
Click Here To Request More Information
STC and ASTM E-90 tested all steel vertical sliding doors with fire-resistant core of barrier materials and energy absorbent acoustical insulation.
Click Here To Request More Information
STC and ASTM E-90 tested all steel horizontal sliding doors with fire-resistant core of barrier materials and energy absorbent acoustical insulation.
Click Here To Request More Information
STC and ASTM E-90 tested all steel vertical sliding doors with fire-resistant core of barrier materials and energy absorbent acoustical insulation.
Click Here To Request More Information
STC and ASTM E-90 tested all steel swing doors with fire-resistant core of barrier materials and energy absorbent acoustical insulation.
Click Here To Request More Information
STC and ASTM E-90 tested all steel swing doors with fire-resistant core of barrier materials and energy absorbent acoustical insulation.
Click Here To Request More Information
STC rating is factory estimated. All steel horizontal sliding doors are tested with fire-resistant core of barrier materials and energy absorbent acoustical insulation.
Click Here To Request More Information
STC and ASTM E-90 tested all steel swing doors with fire-resistant core of barrier materials and energy absorbent acoustical insulation.
Click Here To Request More Information
STC and ASTM E-90 tested all steel horizontal sliding doors with fire-resistant core of barrier materials and energy absorbent acoustical insulation.
Click Here To Request More Information
STC and ASTM E-90 tested all steel swing doors with fire-resistant core of barrier materials and energy absorbent acoustical insulation.
Click Here To Request More Information
All steel construction door for use in high-temperature applications.
Click Here To Request More Information
Metal clad single or double leaf swing doors.
Click Here To Request More Information
Jamison Door Company has captured 100 years of door making experience and artistry in this beautifully-hand crafted limited edition door. Made with genuine 3/4" thick oak lumber and bronze finished hardware, this signature door replicates early 1900s door design in classic Art Deco style.
The latch and hinges are the authentic Jamison originals. There is no better choice if looking for something beautiful, unique, and high quality.
Click Here To Request More Information
Metal clad or all steel single or double leaf door.
Click Here To Request More Information
Single leaf horizontal sliding manually operated door.
Click Here To Request More Information
Manually operated UL 3 hour rated single leaf horizontal sliding cooler and freezer fire doors.
Power operation can be added and comes with a letter of compliance since the door has only been tested as manual.
Click Here To Request More Information
Jamotuf Doors
‘Tuf’ and Beautiful. The Jamotuf® product line is the perfect combination of form and function.
Click Here To Request More Information
‘Tuf’ and Beautiful. The Jamotuf® product line is the perfect combination of form and function.
Click Here To Request More Information
Jamoclean Cleanroom Doors
Jamoclean’s seamless and hygienic fiberglass swinging door system is backed with over 60 years of experience providing peace of mind in the most demanding environments. In life sciences where quick access and environmental control are critical, these doors offer custom solutions that are exceptionally clean, durable, and secure. Using our state-of-the-art CleanDrive technology, Jamoclean swing doors not only surpass market demands, but also exceed requirements.
Click Here To Request More Information
When a facility requires a sterile and controlled environment, Jamoclean sliding doors are the solution. Our doors are engineered with a full perimeter weather seal that keeps out contaminants and allows for a full door wipe down to ensure cleanliness. The Jamoclean line plays an essential role in preventing cross-contamination as well as maintaining correct room pressures and air circulation rates. Our advanced CleanDrive technology ensure optimum operating efficiency and cost savings.
Click Here To Request More Information
The DynamicRoll® CB 125 High Speed Door is the perfect door for your cleanroom application. This high speed roll-up door is designed to separate over pressured sterile environments.
Thanks to the tension and its special retention system, the DynamicRoll® CB 125 High Speed Door guarantees controlled loss of pressure and allows the ventilation system and air purification to operate correctly. Airflow between rooms is limited, reducing the risk for contamination and air pressure loss.
Click Here To Request More Information
The DynamicRoll® CB 230 is a highly reliable high-speed door intended to keep your cleanroom clean. Its fast speed and tight full perimeter seal keep your over pressured environment sterile, allowing the ventilation and air purification systems to operate correctly.
This door operates flawlessly in interlock systems with multiple DynamicRoll® CB 230 High Speed Doors. No stiffeners or hard parts are used in the door panel. An escape function is standardly built in. The door seals the floor with a soft bottom edge.
Click Here To Request More Information
Industry Solutions
The aerospace and airline industry demands precision, reliability, and top-tier performance. Jamison Door Company delivers advanced door solutions tailored to meet these high standards, ensuring smooth operations in both commercial and industrial environments. From protecting aircraft hangars to securing sensitive production areas, our doors are engineered for optimal safety, energy efficiency, and durability.
Our range of products includes high-speed roll-up doors, sound reduction doors, and specialty doors that safeguard your operations from environmental fluctuations, noise, and contamination. With decades of experience, Jamison's solutions help enhance operational efficiency, reduce energy costs, and meet the stringent requirements of this industry.
Whether you need cleanroom doors for assembly areas or heavy-duty doors for storage facilities, Jamison offers customizable solutions designed to meet the unique needs of aerospace and airline operations. Trust in our commitment to quality and innovation to keep your business flying high.
When the auto industry needs durable, speedy, high-performance doors, they call Jamison.
Manufacturers. Dealerships. Parking Facilities. Car Washes. From engine test cell doors to heavy metal industrial solutions to durable high-speed rollups, Jamison engineers a wide range of doors for all things automotive.
Whatever your automotive industry need, Jamison is likely to have the perfect solution.
Innovative designs. Unsurpassed product quality. Outstanding customer service.
Jamison has been designing and manufacturing the best Cold Storage doors in the industry for more than a hundred years. Now, technology has expanded the range of solutions to include HCR air doors.
High speed and tight seals help maintain the desired air temperature and humidity. Productivity, sanitation, quality.
Have a specific need for the Beverage or Food Industry? Contact us with your requirements to start a conversation.
Jamison Door Company provides a wide array of door solutions tailored to meet the diverse and critical needs of government facilities. From secure storage spaces to high-traffic areas, our doors are built to enhance security, efficiency, and reliability in even the most demanding environments.
With a legacy of innovation and precision engineering, Jamison delivers doors that are designed to meet strict government standards for safety and performance. Whether it’s energy-efficient solutions for federal buildings, sound-reducing doors for classified areas, or durable options for military facilities, our products ensure the protection of people, assets, and operations.
Our customizable solutions can be adapted to meet the unique challenges of government operations, including enhanced security, environmental control, and durability. With decades of experience working with government clients, Jamison Door is your trusted partner for reliable, high-performance solutions that meet your exacting standards.
When human health and safety are on the line, the industry calls on Jamison.
Jamison is the industry’s one-stop source for the enormous range of applications across the Healthcare spectrum. Hospitals, labs, pharmaceutical facilities and many others consistently turn to Jamison and our various technologies for safe, secure, high-performing doors.
The demands of industry in the 21st century require superior doors - Jamison.
In industry, time is money. And Jamison doors help facilitate the movement of goods and personnel like no other company. Quite simply, we offer the widest selection of industrial doors to suit just about every imaginable application. Whether it swings, rolls, slides, uses a curtain of air or RFID technology, a Jamison door is built for performance.
Connect with a Jamison representative to identify the perfect solution for your application.
Manufacturing solutions from RFID to particulate control.
Manufacturers are using Jamison’s RFID solutions to reduce labor and operating costs, lower returns processing, and to streamline work-flow systems. RFID reduces operational costs and helps bottom-line income by improving asset management and reducing material costs.
Improve product and production tracking Increase the speed and accuracy for tracking pallets, cartons and containers.
Improve assembly efficiencies throughout the entire assembly process.
Improve inventory management.
Due to real-time inventory and routing improvements RFID allows for quicker product movement.
When your brand relies on sound, you can rely on Jamison.
Theaters. Broadcasting facilities. Recording studios. Isolating venues like these from external noise and creating a controlled sound environment is critical to their success. – financial and otherwise. You’ll find Jamison doors at ABC’s Washington Network News Bureau, behind the scenes of “Good Morning America” and in New York University’s Performing Arts Center, to name just a few.
Contact Jamison to start a conversation about your ideal sound reduction solution.
Jamison helps people and goods move at maximum efficiency.
Whether it is high speed traditional solutions or innovative recirculatory air doors to ‘remove all obstacles’, Jamison supplies your solutions.
Whatever the primary requirements of your distribution or warehouse facilities, Jamison’s wide range of products and technologies are sure to provide your ideal solution.