Smoke & Fire Curtains and Integrated Fire Doors

UL 10D Fire Protective Smoke Curtain- ICC-ES AC77

• Used To Protect Elevator Openings Per IBC Section 3006.3 Item 3, The System Is an Alternative to Enclosed Elevator Lobbies.

• When Installed at The Intersection of The Elevator Lobby and Corridor, The System Is an Alternative to The Requirement for Separate Enclosed Elevator Lobbies in Accordance with IBC Section 3006.3 Item 2.

• Meets Local/National Building Codes for Elevator Smoke Containment

• ICC-ES Evaluation Report ESR# 4761 - AC77 Listed for Egress

• Multiple Egress Options Available

• UL 1784 - Smoke Air Leakage Test of Door Assemblies

• UL 10D - Fire Tests of Fire-Protective Curtain Assemblies

• UL 864 - Control Units for Fire Protective Signaling Systems

UL 10D Automatic Fire Protective Smoke Curtains are used as smoke barriers and partitions.
Protecting Atriums, Corridors, and other large openings by forming compartments throughout the building.

UL has tested fire-protective curtain assemblies with the intent of providing supplemental, passive fire protection.

Features of Vertical Fire Protective Smoke Curtains:

• UL 10D 1HR Fire Rating: Model DSI-C1HR

• UL 10D 3HR Fire Rating: Model DSI-C3HR

• UL 1784 Smoke Air Leakage Test of Door Assemblies

• UL 864 Control Units for Fire Protective Signaling Systems

• Vertical Acting

• Multiple Egress Options

• Battery Backup System

• Fail-safe System with Auto Reset

• Cost-effective

• Compact Design, Low Headroom Requirements

• Lightweight, Requires Minimal Structural Support

• Up to 984' in Width and Up to 39' in Height

DSI Accordion Fire Curtains share the same qualities as UL 10D Automatic Fire Protective Smoke Curtains but with the added benefit of taking on complicated geometry. Used as smoke barriers and partitions, protecting atriums, corridors, and other large openings by forming compartments throughout the building.

UL has tested fire-protective curtain assemblies with the intent of providing supplemental, passive fire protection.

Features of Accordion Fire Protective Smoke Curtains:

• UL 10D 1HR Fire Rating: Model DSI-A1HR

• UL 10D 4HR Fire Rating: Model DSI-A4HR

• UL 1784 Smoke Air Leakage Test of Door Assemblies

• UL 864 Control Units for Fire Protective Signaling Systems

• Vertical Acting

• Create Angles Without a Corner Post

• Multiple Egress Options

• Battery Backup System

• Fail-safe System with Auto Reset

• Cost-effective

• Compact Design, Low Headroom Requirements

• Lightweight, Requires Minimal Structural Support

• Up to 820' in Linear Length and Up to 39' in Height

DSI Automatic Draft Smoke Curtains assist the management of smoke in a building, channeling the movement of smoke; to smoke extraction points in the building or by creating reservoirs to slow down the spreading of smoke. An alternative solution to glass baffles in stairways, ramps, and other vertical openings with low head clearance.

Features of Automatic Draft Curtains:

• NFPA 13 – Draft Stop

• UL 10D 1HR Fire Rating: Model DSI-D1HR

• Vertical Acting

• Fail-safe System with Auto Reset

• Compact Design, Low Headroom Requirements

• Lightweight, Requires Minimal Structural Support

• Up to 984' in Linear Length and Up to 39' in Height

A horizontal solution to design challenges of smoke and fire from separation through ceiling, atrium voids, stairwells, and skylights. 

Features of Horizontal Curtains:

• UL 10D 1HR Fire Rating: Model DSI-H1HR

• UL 10D 3HR Fire Rating: Model DSI-H3HR

• UL 1784 Smoke Air Leakage Test of Door Assemblies

• UL 864 Control Units for Fire Protective Signaling Systems

• Battery Backup System

• Fail-safe System with Auto Reset

• Cost-effective

• Compact Design, Low Headroom Requirements

• Lightweight, Requires Minimal Structural Support

• Up to 26' in Width and Up to 33' in Length

The DSI-HS10B Hose Stream Rated Smoke and Fire Curtain incorporates the cutting-edge technology of our UL 10D curtain products but with the advantage of being code compliant in any fire wall rated up to 3 hours.

With a UL10B 3-hour fire rating, the DSI-HS10B Fire Curtain can be used in fire walls and fire barrier walls as a replacement solution to traditional Coiling Steel Fire doors.

The assembly is comprised of a proprietary multi layered fire rated fiberglass/stainless steel fabric wound around a roller which is encased in a compact head box that is typically installed above the ceiling with side guides that are buried in the wall. This makes the system virtually invisible until activated.

Features:

• Applications Include: Fire Wall Openings, Areas of Safe Refuge, Egress Stairwells & Other Large Openings Found in Garages.

• UL 10B - Standard for Safety - Fire Tests of Door Assemblies

• Hose Stream Rated for Up To 180 Minutes.

• UL 1784 - Smoke Air Leakage Test of Door Assemblies

• Meets Local & National Codes for Smoke Containment & Fire Separation

• Cost Savings to Traditional Metal Coiling Overhead Coiling Doors

• Vertical & Horizontal Acting with Custom Sizes

• Creates Open Space for Your Building Design.

• Compact Design, With Low Headroom Requirements, Almost Completely Hidden.

• Lightweight, Requires Minimal Structural Support.

• Egress Option with A Push to Raise Button Located on Both Sides of The System.

• Battery Backup System, Fail Safe System with Automatic Reset

The DSI Hose Stream Rated Horizontal Fire Curtain Model DSI-HHS10B allows architects to compartmentalize large floor openings and reduce or eliminate mechanical smoke evacuation systems. A solution to design challenges of preventing smoke and fire from spreading through the ceiling and atrium voids, stairwells, and skylights.

The DSI Hose Stream Rated Horizontal Fire Curtain consists of a light gauge compact steel headbox that houses the roller, fabric, and motor within the casing to create a small package that remains virtually invisible until deployed. The curtain consists of a light weight proprietary multi layered fire rated fiberglass/ stainless steel fabric and slim steel side guides.

The DSI-HHS10B Horizontal Fire Curtain incorporates the cutting edge technology of our UL 10D curtain products but with the advantage of being tested and labeled to 2 hours UL 10B with Hose Stream.

Features:

• UL 10B 120 minutes with Hose Stream

• Lightweight – 75% lighter than steel fire doors, requires little to no structural support

• Compact design

• Creates open space for your building design

• Saves money by reducing or eliminating smoke evacuation systems

• Battery backup system standard

• Fail-safe deployment with automatic reset

• Multiple mounting options

• Widths to 32 feet wide

• Lengths to 32 feet long*

  *For larger sizes consult the factory

A perfect fit for every door installation - including butnot limited to, areas of assembly, elevator cabs, elevator lobbies, cross corridors, smoke barriers and stairwells.

• Incomparable and attractive solutions for every need

• No bulky lever escutcheons, roses, exit device housings, faceplates, protruding top strikes or door hinges

• A variety of Mechanical and Electrical options to match the functional requirements of the installation

• Saving of valuable time and on-site coorordination with pre-installed and pre-adjusted hardware

• Simple installation - in most cases just hang the door in the opening and attach the door closer

• Complete compatability as it is designed, tested and certified as a complete system

Syntegra™ Door Systems' superior variety of finish and hardware options makes them perfect for demanding cross corridor and area separation projects. Our concealed hinges and closers and flush panic devices allow uss to create attractive, substantial doors that blend into the background when they're not in use.

Our door systems make it easier to meet regulatory requirements while creating safe, attractive, usable indoor spaces that keep their good looks longer.

An economical and architecturally pleasing solution to your smoke containment & elevator shaft protection requirements.

Advantages To The Syntegra Elevator Smoke Door System

• Cost effective – The most economical way to meet elevator shaft protection codes while creating maximum usable space

• Code Compliant- Meets ADA and UL1784 Air leakage requirements for elevator shafts

• Fire rated – UL10C up to 3 hours

• Single Source -An integrated door system with all parts and hardware by one manufacturer preassembled at the factory

• Clean Aesthetics – Flush push pads or panic hardware mortised into the door body

• Custom finish- Various custom finish to chose from

• Custom sizes – Available sizes up to 4'3" wide x 10'-0 per leaf

• Zero Clearance Elevator Door – a possible solution to zero clearance vestibule requirements

Stairwell Doors, Temperature Rise Fire Doors

All Temperature rise doors exceed the fire code limits by using special construction that allows us to achieve a 450 degree for 30 minutes maximum temperature rise rating on our Syntegra™ Door System.

As with all our doors, the Stairwell Temperature Rise door has the lowest smoke leakage rating in the industry, comes in a variety of low profile hardware, and installs in a matter of minutes.

Temperature Rise Doors come with either 90-minute or 180-minute positive pressure fire labels. Built-in electronic locking functions for security purposes are optional as well.