Smoke & Fire Curtains and Integrated Fire Doors
UL 10D Fire Protective Smoke Curtain- ICC-ES AC77
Used To Protect Elevator Openings Per IBC Section 3006.3 Item 3, The System Is an Alternative to Enclosed Elevator Lobbies.
When Installed at The Intersection of The Elevator Lobby and Corridor, The System Is an Alternative to The Requirement for Separate Enclosed Elevator Lobbies in Accordance with IBC Section 3006.3 Item 2.
Meets Local/National Building Codes for Elevator Smoke Containment
ICC-ES Evaluation Report ESR# 4761 - AC77 Listed for Egress
Multiple Egress Options Available
UL 1784 - Smoke Air Leakage Test of Door Assemblies
UL 10D - Fire Tests of Fire-Protective Curtain Assemblies
UL 864 - Control Units for Fire Protective Signaling Systems
UL 10D Automatic Fire Protective Smoke Curtains are used as smoke barriers and partitions.
Protecting Atriums, Corridors, and other large openings by forming compartments throughout the building.
UL has tested fire-protective curtain assemblies with the intent of providing supplemental, passive fire protection.
Features of Vertical Fire Protective Smoke Curtains:
UL 10D 1HR Fire Rating: Model DSI-C1HR
UL 10D 3HR Fire Rating: Model DSI-C3HR
UL 1784 Smoke Air Leakage Test of Door Assemblies
UL 864 Control Units for Fire Protective Signaling Systems
Vertical Acting
Multiple Egress Options
Battery Backup System
Fail-safe System with Auto Reset
Cost-effective
Compact Design, Low Headroom Requirements
Lightweight, Requires Minimal Structural Support
Up to 984' in Width and Up to 39' in Height
DSI Accordion Fire Curtains share the same qualities as UL 10D Automatic Fire Protective Smoke Curtains but with the added benefit of taking on complicated geometry. Used as smoke barriers and partitions, protecting atriums, corridors, and other large openings by forming compartments throughout the building.
UL has tested fire-protective curtain assemblies with the intent of providing supplemental, passive fire protection.
Features of Accordion Fire Protective Smoke Curtains:
UL 10D 1HR Fire Rating: Model DSI-A1HR
UL 10D 4HR Fire Rating: Model DSI-A4HR
UL 1784 Smoke Air Leakage Test of Door Assemblies
UL 864 Control Units for Fire Protective Signaling Systems
Vertical Acting
Create Angles Without a Corner Post
Multiple Egress Options
Battery Backup System
Fail-safe System with Auto Reset
Cost-effective
Compact Design, Low Headroom Requirements
Lightweight, Requires Minimal Structural Support
Up to 820' in Linear Length and Up to 39' in Height
DSI Automatic Draft Smoke Curtains assist the management of smoke in a building, channeling the movement of smoke; to smoke extraction points in the building or by creating reservoirs to slow down the spreading of smoke. An alternative solution to glass baffles in stairways, ramps, and other vertical openings with low head clearance.
Features of Automatic Draft Curtains:
NFPA 13 – Draft Stop
UL 10D 1HR Fire Rating: Model DSI-D1HR
Vertical Acting
Fail-safe System with Auto Reset
Compact Design, Low Headroom Requirements
Lightweight, Requires Minimal Structural Support
Up to 984' in Linear Length and Up to 39' in Height
A horizontal solution to design challenges of smoke and fire from separation through ceiling, atrium voids, stairwells, and skylights.
Features of Horizontal Curtains:
UL 10D 1HR Fire Rating: Model DSI-H1HR
UL 10D 3HR Fire Rating: Model DSI-H3HR
UL 1784 Smoke Air Leakage Test of Door Assemblies
UL 864 Control Units for Fire Protective Signaling Systems
Battery Backup System
Fail-safe System with Auto Reset
Cost-effective
Compact Design, Low Headroom Requirements
Lightweight, Requires Minimal Structural Support
Up to 26' in Width and Up to 33' in Length
The DSI-HS10B Hose Stream Rated Smoke and Fire Curtain incorporates the cutting-edge technology of our UL 10D curtain products but with the advantage of being code compliant in any fire wall rated up to 3 hours.
With a UL10B 3-hour fire rating, the DSI-HS10B Fire Curtain can be used in fire walls and fire barrier walls as a replacement solution to traditional Coiling Steel Fire doors.
The assembly is comprised of a proprietary multi layered fire rated fiberglass/stainless steel fabric wound around a roller which is encased in a compact head box that is typically installed above the ceiling with side guides that are buried in the wall. This makes the system virtually invisible until activated.
Features:
Applications Include: Fire Wall Openings, Areas of Safe Refuge, Egress Stairwells & Other Large Openings Found in Garages.
UL 10B - Standard for Safety - Fire Tests of Door Assemblies
Hose Stream Rated for Up To 180 Minutes.
UL 1784 - Smoke Air Leakage Test of Door Assemblies
Meets Local & National Codes for Smoke Containment & Fire Separation
Cost Savings to Traditional Metal Coiling Overhead Coiling Doors
Vertical & Horizontal Acting with Custom Sizes
Creates Open Space for Your Building Design.
Compact Design, With Low Headroom Requirements, Almost Completely Hidden.
Lightweight, Requires Minimal Structural Support.
Egress Option with A Push to Raise Button Located on Both Sides of The System.
Battery Backup System, Fail Safe System with Automatic Reset
The DSI Hose Stream Rated Horizontal Fire Curtain Model DSI-HHS10B allows architects to compartmentalize large floor openings and reduce or eliminate mechanical smoke evacuation systems. A solution to design challenges of preventing smoke and fire from spreading through the ceiling and atrium voids, stairwells, and skylights.
The DSI Hose Stream Rated Horizontal Fire Curtain consists of a light gauge compact steel headbox that houses the roller, fabric, and motor within the casing to create a small package that remains virtually invisible until deployed. The curtain consists of a light weight proprietary multi layered fire rated fiberglass/ stainless steel fabric and slim steel side guides.
The DSI-HHS10B Horizontal Fire Curtain incorporates the cutting edge technology of our UL 10D curtain products but with the advantage of being tested and labeled to 2 hours UL 10B with Hose Stream.
Features:
UL 10B 120 minutes with Hose Stream
Lightweight – 75% lighter than steel fire doors, requires little to no structural support
Compact design
Creates open space for your building design
Saves money by reducing or eliminating smoke evacuation systems
Battery backup system standard
Fail-safe deployment with automatic reset
Multiple mounting options
Widths to 32 feet wide
Lengths to 32 feet long*
*For larger sizes consult the factory
Door Systems provides innovative solutions for your smoke and fire containment needs as well as assisting in the concept, design, and layout of all future projects.
Whether you are an architect seeking consultation on a new construction project or a building owner/engineer looking to bring your existing facility up to code while reducing maintenance costs, the Door Systems staff is here to assist.
Door Systems products include DSI UL 10D Fire Protective Smoke Curtains, DSI UL 10B Hose Stream Rated Smoke and Fire Curtains, and Syntegra Integrated Fire Door Systems.
DSI-UL 10D FIRE PROTECTIVE SMOKE CURTAINS
The gravity fail-safe DSI UL 10D Smoke and Fire Protective Curtains have market leading features and the highest technical specifications available yet offer cost-effective and flexible solutions to fire and smoke control. Typically found in Elevators, Lobbies, Corridors, and Atriums.
DSI curtain systems are designed to be discreet, robust, and simple to operate and maintain, so a solution can be found for the most challenging architectural demands. Every smoke curtain and fire curtain from Door Systems, is rigorously tested and complies with all relevant UL standards allowing their incorporation into design throughout the United States.
DSI-UL 10B HOSE STREAM RATED SMOKE AND FIRE CURTAINS
The DSI-HS10B Hose Stream Rated Smoke and Fire Curtain incorporates the cutting-edge technology of our UL 10D curtain products but with the advantage of being code compliant in any fire wall rated up to 3 hours.
With a UL 10B 3-hour fire rating, the DSI-HS10B Fire Curtain can be used in fire walls and fire barrier walls as a replacement solution to traditional Coiling Steel Fire doors.
The assembly is comprised of a proprietary multi layered fire rated fiberglass/stainless steel fabric wound around a roller which is encased in a compact head box that is typically installed above the ceiling with side guides that are buried in the wall, making the system virtually invisible until activated.
THE SYNTeGRA™ INTEGRATED DOOR SYSTEM
The locally manufactured Syntegra Integrated Door System is created to include all working hardware and the door into a single integrated package. Syntegra completely integrates the steel door, hardware, and frame into a single working unit - no bolt-on or add-ons.
Precision-engineered, factory-assembled systems eliminate the need to order, coordinate, and site-assemble individual components. Code compliant, cost effective, unparalleled durability and superior aesthetics make the
Syntegra Integrated Door System the product of choice for architects and building owners.
By utilizing Door Systems products for your next new or renovation project, you will be acquiring the best, complete, single source solution for your smoke and fire protection requirements.
I invite you to review the full array of products and services we have to offer and look forward to assisting you with any questions you might have regarding your future needs.
Sincerely,
Jeff Bonnema, President