Acudor Products Inc.

Access Panels, Roof Hatches, Floor Doors, Roof Drains, Safety Accessories

CONTACT INFO

9 Woodland Rd. Unit A

Roseland, NJ 07068

Toll Free: 800-722-0501

Phone: 973-575-5120

West Coast location:
4216 North Pecos Rd.
Suite 104
Las Vegas, NV 89115

Phone: 702-644-8710
Fax: 702-644-8720

Contact Us / RFI

CONTENT

SOCIAL

PRODUCTS RELATED TO YOUR SEARCH

Plaster: Wall and Ceiling Access Doors image

All data & files

Plaster: Wall and Ceiling Access Doors - PS-5030

The Acudor PS-5030 is designed for installation in plaster walls and ceilings, before the plaster is applied. An expansion casing bead with 3" wide galvanized lath, included as part of the frame, provides a clean, tight finish between the frame and plaster and also adds reinforcement. The door panel is finished flush with the plaster. Our unique concealed hinge and screwdriver operated cam latches allow the door panel to operate freely with no binding, sagging or distortion.

COMPANY OVERVIEW

ALL PRODUCTS

Universal: Wall and Ceiling Access Doors image

All data & files

Universal: Wall and Ceiling Access Doors - UF-5000

The Acudor UF-5000 is an innovative universal flush access door for walls and ceilings. It is designed for installation in drywall, plaster, masonry, tile or any flush surface. The door panel features rounded safety corners, which provide an architecturally pleasing appearance. The one-piece trim flange will not rack, sag or distort.

BIM SPECS CATALOGS LEED

Universal: Wall and Ceiling Access Doors image

All data & files

Universal: Wall and Ceiling Access Doors - UF5500

The Acudor UF-5500 is a universal flush access door for walls and ceilings, designed for installation in all types of flush surfaces. The drawn flanged door panel has rounded corners for both safety and an architecturally pleasing appearance. The frame is drawn as one piece, which provides excellent strength and rigidity. Fabricated from galvanized steel and coated with a white baked on polyester powder paint, this door will perform well in high corrosive and exterior applications.

Plastic Access Doors image

All data & files

Plastic Access Doors - PA-3000

The Acudor PA-3000 Plastic Access Door is designed to provide easy access to walls and ceilings. The high impact styrene plastic with U.V. stabilizers will not fade or corrode. The door is completely removable from the frame and fits tightly with snap latches. The white finish, with textured exposed surfaces, can be left as is or painted to match the surrounding areas. This door is easy to install by applying caulking adhesive to the back of the frame and pressing into place.

BIM SPECS CATALOGS

Universal: Wall and Ceiling Access Doors image

All data & files

Universal: Wall and Ceiling Access Doors - ED-2002

The ED-2002 flush access door is an economical and attractive access door for walls & ceilings. This quality product is ideally suited for apartments, condominiums and office buildings.

BIM SPECS CATALOGS

Universal Flush Access Door image

All data & files

Universal Flush Access Door - BP-2002

The Acudor BP-2002 is a Universal Flush Access Door. The unique beveled door panel overlaps the frame.

BIM SPECS CATALOGS

Drywall: Wall and Ceiling Access Doors image

All data & files

Drywall: Wall and Ceiling Access Doors - DW-5040

The Acudor DW-5040 is designed specifically for installation in drywall walls and ceilings after drywall has been installed. The door flange is a perforted as a taping bead with pre-punched holes. Drywall compound is applied over the beading at the same time the drywall joints are finished. When the application is completed, only the door panel remains exposed. Our unique concealed hinge and screwdriver operated cam latches allow the door panel, which is formed with flanges on four sides, to operate freely with no binding, sagging or distortion.

BIM SPECS CATALOGS

Recessed Access Doors image

All data & files

Recessed Access Doors - DW-5015

The Acudor DW-5015 recessed access door is designed for flush installation in drywall surfaces when it is required to conceal the door panel, which is recessed 5/8" to receive drywall. The flange of the door is a textured galvanized steel taping bead with pre-punched holes. Drywall compound is applied over the beading at the same time the drywall joints are finished.

BIM SPECS CATALOGS

Recessed Non-Rated Drywall Panel Doors image

All data & files

Recessed Non-Rated Drywall Panel Doors - DW-5058

The Acudor DW-5058 is designed to provide access in walls and ceilings, while maintaining an invisible, architecturally pleasing appearance. This lightweight door is standard with concealed touch latches and an aluminum extrusion, with 5/8" drywall fitted in the door panel. The wing hinge allows the door panel to open to 90 degrees, and also allows for door panel to be removed from frame. ½" drywall models are also available.

BIM SPECS CATALOGS

Round Recessed Non-Rated Drywall Panel Doors image

All data & files

Round Recessed Non-Rated Drywall Panel Doors - DW-5058R

The Acudor DW-5058R is a round door designed to provide access in walls and ceilings, while maintaining an invisible, architecturally pleasing apperance. The DW-5058 door is standard with a touch latch feature. The door is supplied with 5/8" drywall insert.

BIM SPECS CATALOGS

Recessed Access Doors image

All data & files

Recessed Access Doors - Bauco Plus BP58

Bauco Plus BP58 is designed to provide access in walls and ceilings, while maintaining an invisible, architecturally pleasing appearance. The door panel is supplied with one layer of 5/8 inch drywall (or 1/2) The concealed hinge and removable door panel, along with the easy installation and fishing process, make this access door the best drywall access door in the industry.

Fire Rated Recessed Access Doors for Drywall image

All data & files

Fire Rated Recessed Access Doors for Drywall - FW-5015

The Acudor FW-5015 recessed for drywall, fire rated access door is designed for installation in drywall walls requiring concealing of the door panel consistent to the surrounding walls. The door panel is supplied with 5/8" drywall. The Acudor FW-5015 is approved by Underwriter's Laboratories (UL) for 1-1/2 hours "B" label in walls. Designed to maintain continuity in a 2 hour fire barrier wall, the FW-5015 should be used whenever it is necessary to provide access in fire rated drywall walls, where it is required to conceal the door panel. For use in walls, fire-rated for up to 90-minutes with a temperature rise of max 250 degrees C (450 degrees F) over 30 minutes.

BIM SPECS CATALOGS

Fire Rated Recessed for Drywall Ceilings image

All data & files

Fire Rated Recessed for Drywall Ceilings - FWC-5015

For installation in drywall ceilings (fire-rated) requiring concealing of the door panel consistent to surroundings

BIM SPECS CATALOGS

Insulated Fire Rated Access Doors for Drywall image

All data & files

Insulated Fire Rated Access Doors for Drywall - FW-5050-DW

The Acudor FW-5050-DW drywall, insulated fire rated access door is an enhanced FW-5050 that includes a galvanized steel drywall taping bead flange to facilitate installation in drywall. The Acudor FW-5050 is an insulated, fire rated access door approved for use in walls and ceilings. For walls, this door has an Underwriters Laboratories (UL and ULC), 1-1/2 hour "B" label, with a maximum temperature rise of 250 degrees after 30 minutes. This door should be used in walls when temperature rise or heat transmission is a factor. For fire rated ceilings, this door has been approved by Warnock Hersey International for 3 hours (max. size to 24" x 36")

BIM SPECS CATALOGS

Insulated Fire Rated Access Doors image

All data & files

Insulated Fire Rated Access Doors - FW-5050

The Acudor FW-5050 is an insulated, fire rated access door approved for use in walls and ceilings. For walls, this door has an Underwriters Laboratories (UL and ULC), 1-1/2 hour "B" label, with a maximum temperature rise of 250 degrees after 30 minutes. This door should be used in walls when temperature rise or heat transmission is a factor. For fire rated ceilings, this door has been approved by Warnock Hersey International for 3 hours (max. size to 24" x 36")

BIM SPECS CATALOGS

Upswing Insulated Fire Rated Access Doors image

All data & files

Upswing Insulated Fire Rated Access Doors - FW-5050-UP

The Acudor FW-5050-UP is an upswing fire rated access door approved for installation in ceilings. This door has been approved by Warnock Hersey International for three hours, with a maximum size of 24" x 36". The door panel is insulated and has a coil spring for dampening when closing. The FW-5050-UP is available in both steel with a prime coat of white baked enamel and also stainless steel with a #4 satin polish.

BIM SPECS CATALOGS

Uninsulated Fire Rated Access Doors image

All data & files

Uninsulated Fire Rated Access Doors - FB-5060

The Acudor FB-5060 is approved by Underwriters Laboratories (UL) for 1 1/2 hours "B" label in walls and ULC for 2 hours "B" label in walls. Designed to maintain continuity in a 2-hour fire barrier wall, the FB-5060 should be used whenever it is necessary to provide access in fire rated walls, when temperature rise is not a factor. For drywall applications, this door is available (FB-5060-DW) with galvanized steel drywall taping bead flange.

BIM SPECS CATALOGS

Uninsulated Fire Rated Access Doors for Drywall image

All data & files

Uninsulated Fire Rated Access Doors for Drywall - FB-5060-DW

The Acudor FB-5060-DW drywall, fire rated access door is an enhanced FB-5060 that includes a galvanized steel drywall taping bead flange to facilitate installation in drywall. The Acudor FB-5060 is approved by Underwriters Laboratories (UL) for 1 1/2 hours "B" label in walls and ULC for 2 hours "B" label in walls. Designed to maintain continuity in a 2-hour fire barrier wall, the FB-5060 should be used whenever it is necessary to provide access in fire rated walls, when temperature rise is not a factor.

BIM SPECS CATALOGS

Uninsulated Fire Rated Access Doors, Recessed for Tile image

All data & files

Uninsulated Fire Rated Access Doors, Recessed for Tile - FB-5060-TD

The Acudor FB-5060-TD recessed for tile, fire rated access door is an enhanced FB-5060 designed for use in tiled walls. The door is recessed 1/2" and is lined with self-furring lath. The Acudor FB-5060 is approved by Underwriters Laboratories (UL) for 1 1/2 hours "B" label in walls and ULC for 2 hours "B" label in walls. Designed to maintain continuity in a 2-hour fire barrier wall, the FB-5060 should be used whenever it is necessary to provide access in fire rated walls, when temperature rise is not a factor.

BIM SPECS CATALOGS

Plaster: Wall and Ceiling Access Doors image

All data & files

Plaster: Wall and Ceiling Access Doors - PS-5030

The Acudor PS-5030 is designed for installation in plaster walls and ceilings, before the plaster is applied. An expansion casing bead with 3" wide galvanized lath, included as part of the frame, provides a clean, tight finish between the frame and plaster and also adds reinforcement. The door panel is finished flush with the plaster. Our unique concealed hinge and screwdriver operated cam latches allow the door panel to operate freely with no binding, sagging or distortion.

Recessed Access Doors image

All data & files

Recessed Access Doors - AP-5010

The Acudor AP-5010 recessed access door is designed for use in acoustical plaster walls and ceilings. The door is recessed 5/8" and is lined with self-furring lath. An expansion casing bead with 3" wide galvanized lath, included as part of the frame, provides a clean, tight finish between the frame and plaster and also adds reinforcement.

Recessed Non-Rated Doors image

All data & files

Recessed Non-Rated Doors - AT-5020

The Acudor AT-5020 recessed access door is designed for flush installation in walls or ceilings when it Is required to conceal the door panel, which is recessed 1".

Surface Mounted Access Doors image

All data & files

Surface Mounted Access Doors - SF-2000

The Acudor SF-2000 is an innovative surface mounted access door for all types of walls and ceilings. The door panel features rounded safety corners providing an architecturally pleasing appearance. An exposed continuous piano hinge allows the door panel to open to 175 degrees. The SF-2000 is the ideal choice for all applications. The mounting holes in each corner of the frame allow for easy installation. Since there is no frame to extend into the wall or ceiling, the SF-2000 is perfect for access to odd size openings.

Aluminum Access Doors image

All data & files

Aluminum Access Doors - LT-4000

The Acudor LT-4000 is a lightweight aluminum access door for walls and ceilings. With a durable design and lightweight components, access to large openings in walls and ceilings is made easy. The mitered aluminum frame provides an architecturally pleasing appearance. The aluminum door panel is lined with 3/4" polystyrene insulation. The all aluminum construction of the LT-4000 is ideal for exterior applications, and also those specific interior applications where corrosion or moisture is a concern. Gasketing between the door and frame is provided to insure a tight fit.

BIM SPECS CATALOGS

Airtight/Watertight Access Doors image

All data & files

Airtight/Watertight Access Doors - ADWT

The Acudor ADWT is a flush access door that has been tested for air infiltration and water penetration. The Door and frame are fully welded and gasketed. This access door is ideal for use in laboratories, clean rooms, operating rooms, etc. where an airtight/watertight seal is required. Standard in type 304 stainless steel with a #4 satin polish. Prime coated Steel is also available.

BIM SPECS CATALOGS

Walk Through Access Doors image

All data & files

Walk Through Access Doors - WD-8000

The Acudor WD-8000 Walk Through Access Door is designed to provide convenient walk through access to duct work interiors and air handling units. The heavy duty construction, along with a continuous hinge and compression handles provide for low leakage in low to medium pressure systems and plenums.

Fully Gasketed Access Doors image

All data & files

Fully Gasketed Access Doors - AS-9000

The Acudor AS-9000 is a fully gasketed access door, designed for use in walls and ceilings. The formed door panel, with a concealed hinge, and closed cell neoprene gasket, provides for a tight fit. Most popular in stainless steel, with a #4 satin polish, this door is also available in prime coated steel. This door is commonly used in clean rooms, laboratories, operating rooms, etc.

Vent Fan Coil Door image

All data & files

Vent Fan Coil Door - VFCD

The Acudor VFCD is a Vent Fan Coil Door which provides unobstructed access and easy serviceability to Vertical Fan Coil Units in luxury Hotels, Condominiums, Apartments

SPECS CATALOGS DATASHEETS

Hinged Duct Access Doors image

All data & files

Hinged Duct Access Doors - HD-5070

Acudor Duct Access Doors are designed to provide convenient, economical access to duct components. The insulated door panel, along with the gasketing between the door and frame assures a tight seal without obstruction in the air system. Acudor duct access doors are available in either hinged (HD-5070) or double cam (CD-5080) construction.

BIM SPECS CATALOGS

Double Cam No Hinge Duct Access Doors image

All data & files

Double Cam No Hinge Duct Access Doors - CD-5080

Acudor Duct Access Doors are designed to provide convenient, economical access to duct components. The insulated door panel, along with the gasketing between the door and frame assures a tight seal without obstruction in the air system. Acudor duct access doors are available in either hinged (HD-5070) or double cam (CD-5080) construction.

Hinged Duct Doors for Ductboard/Fiberglass ducts image

All data & files

Hinged Duct Doors for Ductboard/Fiberglass ducts - HD-5070-F

Acudor Duct Access Doors for Ductboard and Fiberglass Ducts are designed to provide convenient, economical access to fiberglass ducts. These doors are for use in low to medium pressure fiberglass ducts. Acudor duct access doors for Fiberglass Ducts are available in either hinged (HD-5070-F).

BIM SPECS CATALOGS

High Pressure Duct Doors image

All data & files

High Pressure Duct Doors - CD-5080-HP

Acudor Duct Access Doors for High Pressure Ducts are designed to provide convenient, economical access to high pressure ducts. These doors are for use in high pressure ducts up to 8" static pressure. Pressure rated to 8" W.G. with leakage no greater than 2 CFM per sq. ft. or less. The 5/8" notched knock over tabs on the inside of the frame provide for easy installation.

Round Duct Access Doors image

All data & files

Round Duct Access Doors - RD-5090

The Acudor RD-5090 is designed to provide convenient, economical access to round ducts. The pull and catch lock system, along with the gasketing on the door assures a tight seal without obstruction in the air system. The steel continuous piano hinge provides for easy installation.

Double Cam No Hinge Duct Door for Ductboard/Fiberglass Ducts image

All data & files

Double Cam No Hinge Duct Door for Ductboard/Fiberglass Ducts - CD-5080-F

Acudor Duct Access Doors for Fiberglass Ducts are designed to provide convenient, economical access to ductboard and fiberglass ducts. These doors are for use in low to medium pressure fiberglass ducts. Acudor duct access doors for Ductboard/Fiberglass Ducts are available in double cam (CD-5080-F) construction.

BIM SPECS CATALOGS

Grease Duct Access Doors image

All data & files

Grease Duct Access Doors - GDD

The Acudor GDD is a UL and ULC listed access door for installation in kitchen exhaust systems. The 16 gage galvanized steel construction along with the high temperature resistant gasket and sealant allows this door to be grease tight and airtight. This door meets or exceeds requirements of all mechanical codes.

Hinged Self Stick Duct Door image

All data & files

Hinged Self Stick Duct Door - HDSS-6020 (for Sheet Metal Duct)

The HDSS-6020 Self Stick Duct Door provides easy access to sheet metal ducts by utilizing an innovative self stick frame for easy installation. The door panel is insulated, single cam, continuous aluminum piano hinge. The HDSS-6020 is tested to 10" SP with minimal leakage.

No Hinge Self Stick Duct Door (for Sheet Metal Duct) image

All data & files

No Hinge Self Stick Duct Door (for Sheet Metal Duct) - CDSS-6030

The CDSS-6030 Self Stick Duct Door provides easy access to sheet metal ducts by utilizing an innovative self stick frame for easy installation. The door panel is insulated, double cam, no hinge. The CDSS-6030 is tested to 10" SP with minimal leakage.

Walk Through Access Doors image

All data & files

Walk Through Access Doors - WD-8000

The Acudor WD-8000 Walk Through Access Door is designed to provide convenient walk through access to duct work interiors and air handling units. The heavy duty construction, along with a continuous hinge and compression handles provide for low leakage in low to medium pressure systems and plenums.

Glass Fiber Reinforced Gypsum Radius Corner image

All data & files

Glass Fiber Reinforced Gypsum Radius Corner - GFRG-R

The Acudor GFRG-R, glass fiber reinforced gypsum, Radius cornered, ceiling access doors are designed to blend seamlessly into drywall ceiling. Perfect for new and retrofit applications, the unit consists of a surround frame with pre-drilled fastener holes and a drop-in door panel. Surround frame has tapered edge to accommodate both 5/8" and 1/2" drywall.

BIM SPECS CATALOGS

Glass Fiber Reinforced Gypsum Square Corner image

All data & files

Glass Fiber Reinforced Gypsum Square Corner - GFRG-S

The Acudor GFRG-S, glass fiber reinforced gypsum, square cornered, ceiling access doors are designed to blend seamlessly into drywall ceiling. Perfect for new and retrofit applications, the unit consists of a surround frame with pre-drilled fastener holes and a drop-in door panel. Surround frame has tapered edge to accommodate both 5/8" and 1/2" drywall.

BIM SPECS CATALOGS

Glass Fiber Reinforced Gypsum Radius Corner HINGED image

All data & files

Glass Fiber Reinforced Gypsum Radius Corner HINGED - GFRG-RH

The Acudor GFRG-RH, glass fiber reinforced gypsum, Radius corner Hinged, ceiling access doors are designed to blend seamlessly into drywall ceiling. Perfect for new and retrofit applications, the unit consists of a surround frame with pre-drilled fastener holes and a hinged panel. Surround frame has tapered edge to accommodate both 5/8" and 1/2" drywall.

BIM SPECS CATALOGS

Glass Fiber Reinforced Gypsum Square Corner HINGED image

All data & files

Glass Fiber Reinforced Gypsum Square Corner HINGED - GFRG-SH

The Acudor GFRG-SH, glass fiber reinforced gypsum, Square corner Hinged, ceiling access doors are designed to blend seamlessly into drywall ceiling. Perfect for new and retrofit applications, the unit consists of a surround frame with pre-drilled fastener holes and a hinged panel. Surround frame has tapered edge to accommodate both 5/8" and 1/2" drywall.

BIM SPECS CATALOGS

Glass Fiber Reinforced Gypsum Round Panel image

All data & files

Glass Fiber Reinforced Gypsum Round Panel - GFRG-Round

GLASS FIBER REINFORCED GYPSUM ROUND PANEL Designed to blend seamlessly into drywall ceilings

BIM SPECS CATALOGS

Ladder Access Roof Hatch, Galvanized (RHG) image

All data & files

Ladder Access Roof Hatch, Galvanized (RHG)

Acudor Ladder Access Roof Hatches are designed to provide convenient, economical access to the roof of a building.

Ladder Access Roof Hatch, Aluminum (RHA) image

All data & files

Ladder Access Roof Hatch, Aluminum (RHA)

Acudor Ladder Access Roof Hatches are designed to provide convenient, economical access to the roof of a building.

Ship Stair Access Roof Hatch, Galvanized (RHG) image

All data & files

Ship Stair Access Roof Hatch, Galvanized (RHG)

Acudor Ship Stair Roof Hatches are designed to provide convenient, economical access to the roof of a building.

Ship Stair Access Roof Hatch, Aluminum (RHA) image

All data & files

Ship Stair Access Roof Hatch, Aluminum (RHA)

Acudor Ship Stair Roof Hatches are designed to provide convenient, economical access to the roof of a building.

Service Stair Access Roof Hatch, Galvanized (RHG) image

All data & files

Service Stair Access Roof Hatch, Galvanized (RHG)

Acudor Service Stair Roof Hatches are designed to provide convenient, economical access to the roof of a building from a full size staircase.

Service Stair Access Roof Hatch, Aluminum (RHA) image

All data & files

Service Stair Access Roof Hatch, Aluminum (RHA)

Acudor Service Stair Roof Hatches are designed to provide convenient, economical access to the roof of a building from a full size staircase.

Equipment Access Roof Hatch Single Leaf, Galvanized (RHG) image

All data & files

Equipment Access Roof Hatch Single Leaf, Galvanized (RHG)

Acudor Equipment Access Roof Hatches are designed to provide convenient, economical access to the roof of a building where larger openings are necessary. This opening allows for equipment to be installed or removed from a building via the roof.

Equipment Access Roof Hatch Single Leaf, Aluminum (RHA) image

All data & files

Equipment Access Roof Hatch Single Leaf, Aluminum (RHA)

Acudor Equipment Access Roof Hatches are designed to provide convenient, economical access to the roof of a building where larger openings are necessary. This opening allows for equipment to be installed or removed from a building via the roof.

Equipment Access Roof Hatch Double Leaf, Galvanized (RHG) image

All data & files

Equipment Access Roof Hatch Double Leaf, Galvanized (RHG)

Acudor Equipment Access Roof Hatches are designed to provide convenient, economical access to the roof of a building where larger openings are necessary. This opening allows for equipment to be installed or removed from a building via the roof.

Equipment Access Roof Hatch Double Leaf, Aluminum (RHA) image

All data & files

Equipment Access Roof Hatch Double Leaf, Aluminum (RHA)

Acudor Equipment Access Roof Hatches are designed to provide convenient, economical access to the roof of a building where larger openings are necessary. This opening allows for equipment to be installed or removed from a building via the roof.

Domed Roof Hatch, Aluminum (RHADD) image

All data & files

Domed Roof Hatch, Aluminum (RHADD)

Acudor Domed Roof Hatches are designed to provide convenient, economical access to the roof of a building. The Polycarbonate Domes provide the benefit of a skylight.

Security Roof Hatch, Galvanized (RHG-SEC) image

All data & files

Security Roof Hatch, Galvanized (RHG-SEC)

Acudor Security Roof Hatches are designed to provide convenient, economical access to the roof of a building while adding an additional level of security. The heavy gauge materials used within this hatch are ideal for applications in banks, prisons, hospitals, and more.

Electric Actuation Roof Hatch, Galvanized (RHG-EA) image

All data & files

Electric Actuation Roof Hatch, Galvanized (RHG-EA)

Acudor Electric Actuation Roof Hatches are designed to provide convenient, economical access to the roof of a building with the ease of automation. By adding an electric actuator, our hatch can be opened and closed remotely. This feature is available on small ladder access hatches, and more importantly on larger equipment hatches, which are typically heavy and difficult to operate.

Electric Actuation Roof Hatch, Aluminum (RHA-EA) image

All data & files

Electric Actuation Roof Hatch, Aluminum (RHA-EA)

Acudor Electric Actuation Roof Hatches are designed to provide convenient, economical access to the roof of a building with the ease of automation. By adding an electric actuator, our hatch can be opened and closed remotely. This feature is available on small ladder access hatches, and more importantly on larger equipment hatches, which are typically heavy and difficult to operate.

Access Door / Floor Hatch Safety Accessories image

All data & files

Access Door / Floor Hatch Safety Accessories

Features
All of these safety products are designed to be used with the Acudor Roof Hatches to allow safe use at all times. Telescoping Post designed to provide easy and safe access through Roof Hatches and Floor Doors. Mounts to top rungs of fixed wall ladder with basic tools. Safety Ladder Extension designed to provide easy and safe access through Roof Hatches and Floor Doors. Mounts to cap flashing of Roof hatch with basic tools.

Aluminum Telescoping Post image

All data & files

Aluminum Telescoping Post - TSP-1

Offers safety accessibility to roof areas through the Roof Hatch opening. Features: Adjustable hardware, installs on any fixed wall ladder. Locks in the upright position and provides the user with a firm grip. Fabricated from Aluminum, will not corrode. Install on a fixed wall ladder as required. Made of aluminum tubing and offers a telescoping section fixed to the ladder. The extended section locks into position allowing for safe egress and ingress off and on a roof.

Safety Ladder Extension image

All data & files

Safety Ladder Extension - SLE-Y:

Offers safety accessibility to roof areas through the Roof Hatch opening. Easy to install, bolts to Cap flashing, fabricated from Steel, will not corrode. Powdered Yellow for visibility and Attaches to Cap Flashing and assist easy egress and ingress through roof hatches.

RGS Safety Rails image

All data & files

RGS Safety Rails

Acudor Safety Rails are designed for all Roof Hatch applications to assist in making every work space as safe as possible

Fixed Ladder image

All data & files

Features

Provides safe, easy & economic access
Ladders Flat Packed Kit with rapid delivery
Modular design serving multitude of length requirements
Easy to store & install
Assembled on site, no special tools necessary
Non-slip Rungs ensure secure footholds & handholds
Standard Finish is Safety Yellow Painted, also available in Galvanized ﬁnish

Floor Door, Floodtight image

All data & files

Floor Door, Floodtight - A-FPS

The Acudor A-FPS Series aluminum floor doors are designed for interior and exterior floodtight applications where water may rise above the surface opening.The angle frame construction with 4" high horizontal leg allow for bolting to the concrete. The diamond plate door panel is reinforced to 625 pounds/sq ft (capable of holding up to 10 feet head of water). The door panel overlaps the frame, compressing the gasket, providing for a floodtight fit.

Floor Door, Floodtight/Gastight image

All data & files

Floor Door, Floodtight/Gastight - AW-APS

The Acudor AW-APS Series aluminum floors doors are designed for interior and exterior applications where floodtight or gastight is required. The angle frame construction is designed to be cast into concrete.The diamond plate door panel is reinforced for a live load of 1560 pounds/sq ft (capable of holding up to 25 ft head of water).The door panel overlaps the frame, compressing the gasket, providing for a floodtight/gastight fit.

Angle Frame Floor Doors image

All data & files

Angle Frame Floor Doors - FA-300

The Acudor FA series aluminum floor doors are designed for interior and exterior applications where watertightness is not required. The angle frame construction with integral anchor flange is designed to be cast into concrete. The diamond plate door panel is equipped with a flush aluminum drop handle and an automatic hold open arm with red vinyl grip.

BIM SPECS CATALOGS

Floor Door Retrofit image

All data & files

Floor Door Retrofit - FA-300R

Designed for interior and exterior applications where watertightness is not required.

Angle Frame Floor Doors image

All data & files

Angle Frame Floor Doors - FA-H20

The Acudor FA series aluminum floor doors are designed for interior and exterior applications where watertightness is not required. This door is designed for off-street locations that may occasionally receive AASHTO H-20-44 wheel loads. The angle frame construction with integral anchor flange is designed to be cast into concrete. The diamond plate door panel is equipped with a flush aluminum drop handle and an automatic hold open arm with red vinyl grip.

BIM SPECS CATALOGS

Channel Frame Floor Doors image

All data & files

Channel Frame Floor Doors - FC-H20

The Acudor FC Series aluminum floor doors are designed for interior and exterior applications where watertightness is required. This door is designed for off-street locations that may occasionally receive AASHTO H-20-44 wheel loads.The channel frame construction with 1 1/2" drainage coupling and integral anchor flange is designed to be cast into concrete. The diamond plate door panel is equipped with a flush aluminum drop handle and an automatic hold open arm with red vinyl grip.

BIM SPECS CATALOGS

Channel Frame Floor Doors image

All data & files

Channel Frame Floor Doors - FC-300

The Acudor FC Series aluminum floor doors are designed for interior and exterior applications where watertightness is required. The channel frame construction with 1 1/2" drainage coupling and integral anchor flange is designed to be cast into concrete. The diamond plate door panel is equipped with a flush aluminum drop handle and an automatic hold open arm with red vinyl grip.

BIM SPECS CATALOGS

Fire Rated Floor Doors - Flush Diamond Plate image

All data & files

Fire Rated Floor Doors - Flush Diamond Plate - FRFD

The Acudor FRFD series fire rated floor doors are designed to maintain the fire rating of a 2 hour floor ceiling assembly in interior applications. The angle frame construction with Anchor flange is designed to be cast into concrete. The flush aluminum diamond plate cover is provided with a U.L. listed 165 degree fusible link for automatic closing and latching in the event of smoke or fire.

BIM SPECS CATALOGS

Recessed 1/8" for Vinyl Tile/Carpet Floor Doors image

All data & files

Recessed 1/8" for Vinyl Tile/Carpet Floor Doors - FT-8040

The Acudor FT series aluminum floor doors are designed for interior and exterior applications that require an access opening that will blend in with the surrounding floor material. The FT-8040 is recessed 1/8" to accommodate carpeting and vinyl tile.

BIM SPECS CATALOGS

Recessed 1" for Ceramic Tile/Concrete Floor Doors image

All data & files

Recessed 1" for Ceramic Tile/Concrete Floor Doors - FT-8050

The FT-8050 is recessed 1" to accommodate ceramic tile/concrete flooring. The Acudor FT series aluminum floor doors are designed for interior and exterior applications that require an access opening that will blend in with the surrounding floor material.

BIM SPECS CATALOGS

Non Hinged: Flush Diamond Plate Floor Doors image

All data & files

Non Hinged: Flush Diamond Plate Floor Doors - FD-8060

The Acudor FD-8060 aluminum floor door is designed for interior applications where watertightness is not required. The flush diamond plate door panel stays secured to the frame with flat head screws and is completely removable.

Non Hinged: Floor Doors - Panel Recessed 1/8" for Vinyl Tile/Carpet image

All data & files

Non Hinged: Floor Doors - Panel Recessed 1/8" for Vinyl Tile/Carpet - FT-8080

The Acudor FT-8080 aluminum floor access door is designed for interior and exterior applications that require an access opening that will blend in with the surrounding floor material. To keep the floor material from cracking or chipping within the door panel, the securing screws are located in the flange of the mounting frame.

BIM SPECS CATALOGS

Non Hinged: Floor Doors - Panel Recessed 1" for Ceramic Tile/Concrete image

All data & files

Non Hinged: Floor Doors - Panel Recessed 1" for Ceramic Tile/Concrete - FT-8080-1

The Acudor FT-8080-1 aluminum floor door is designed for interior and exterior applications that require an access opening that will blend in with the surrounding floor material. To keep the floor material from cracking or chipping within the door panel, the securing screws are located in the flange of the mounting frame.

BIM SPECS CATALOGS